eSCH100
Electronic Lock
- electric lock for wooden interior doors in the living area
- power supply via built-in battery
- panic function: always open from the inside
- up to 90 transponder (tags) or access cards can be registered
eSCHLOSS ADVANTAGES
The 4 eSCHLOSS TYPES
A look at the hinges (stops) shows on the one hand, if it is a stop direction according to DIN right or DIN left. On the other hand, it is possible to determine whether the door can be opened inwards or outwards. This results in four different types of eSCHLOSS.
THE eSCHLOSS eSCH100
The requirements for security and flexibility are high – even within buildings. Certain areas should often be accessible only for authorized people. The electronic lock system from WIR elektronik makes it much easier.
It ensures that certain doors can only be opened by authorized people. When implementing the electronic lock system, we use RFID cards and transponders. The access rights of doors can be flexibly defined by these media and quickly changed as needed.
EASY INSTALLATION IN 3 EASY STEPS
1. REMOVING OLD LOCK
Remove the old door lock if it exists. Before installing the eSCHLOSS, check that the door is hung without any distortion.
2. INSTALL NEW eSCHLOSS
Insert the eSCHLOSS into the existing recess in the door and slide the pusher pin from the thicker side of the door into the eSCHLOSS until the securing clamp rests on the eSCHLOSS.
3. ACTIVATE NEW eSCHLOSS
Screw the eSCHLOSS to the door and glue the attached RFID tag 35 mm away from the face-plate and 40 mm below the door handle on the side of the door where the antenna is located.
SCOPE OF DELIVERY
- eSchloss eSCH100 (depending on the type of stopper)
- master card
- mode change card
- “delete access card”-card
- access cards
- RFID transponder (tag)
- battery
Accessories such as other cards, transponders or rosettes can be found here.
TECHNICAL DATA
Item eSCH100-R | 1002-000001 |
Item eSCH100-L | 1002-000002 |
Item eSCH100-RA | 1002-000003 |
Item eSCH100-LA | 1002-000004 |
supply voltage | 7,2 V battery, 1,2 Ah |
stand-by consumption | 100 nA |
RFID frequencies | 125 kHz |
permitted door weight | up to 100 kg |
back set | 55 mm |
face-plate width | 20 mm |
face-plate depth | 3 mm |
hole distance face-plate | 209 mm |
insert depth | 88 mm |
range of temperature | +8 °C to +35 °C |