Standard eW810-F, eW810-F-M
Electronic Belt Winder
- for all typical type of shutters with 23 mm / 15 mm belt width
- for installation in existing belt housings
- with smoke detector evaluation
- 20 hours power reserve in case of power failure
eWICKLERs ADVANTAGES
The smoke alarm signal evaluation allows an automatic pulling up of the shutters, which ensures even more safety in case of fire. The eW810-F for the flush mounted type has individually adjustable times for lifting and lowering the shutters as much as internal network-synchronized watch. The three LEDs indicate the activated functions. Particularly clever: the LEDs automatically darken when the shutters are closed.
Soft start and soft stop ensure that the shutters run quietly even in the intermediate position. With our accessories, such as the sun sensor, you can make your electric belt winder even smarter. The assembly is easy to perform and can be done without demolition of walls and expensive painting and wallpapering. Our eWickler is therefore ideal for quick and easy retrofitting.
EASY INSTALLATION IN 3 EASY STEPS
1. REMOVE OLD BELT WINDER
Lower your roller shutters completely so that you can remove the old belt winder and unwind the webbing.
2. INSERT BELT STRAP IN eWICKLER
The webbing can be easily inserted and fastened by being inserted from the front into the eWICKLER and then hooked.
3. CONNECTING THE eWICKLER
The installation is also uncomplicated: simply fix the eWickler with mounting screws, pay attention for straight installation and distance to the masonry. You are done!
SCOPE OF DELIVERY
- eWickler eW810-F or eW810-F-M
- connection cable 1.50 m
- installation and operation instructions
- metal fittings
Accessory like the sun/twighlight sensor, the smoke detector and further products you may find here.
TECHNICAL DATA
Item eW810-F | 1001-000011 |
Item eW810-F-M | 1001-000013 |
application | flush mounted |
supply voltage | 230 V ~ 50 Hz |
nominal capacity (max.) | 120 W |
stand-by consumption | ≤ 0,2 W |
nominal torque | 11 Nm |
nominal speed | 32 U/min, regulated |
maximum Traction | 45 kg |
width of belt | 23 mm (eW810-F) / 15 mm (eW810-F-M) |
winding capacity | 6.3 m (1 mm strength of belt) |
permitted shutter surface | ca. 6 qm at 5 kg/qm, ca. 3 qm at 10 kg/qm |
short-time operation | 4 min |
overrun traverse | ≤ 0,2 U |
level of protection | II |
class of protection | IP20 |
power reserve | approx. 20 h (when power failure) |
dimension housing | 132 x 139 x 34,5 mm (HxDxW) |
mounting hole interval | 165/185 mm |
range of temperature | +4 °C up to +40 °C |
frequency range alert | 2.5 kHz up to 4.0 kHz |
Dimensions
FAQ
Can I use the existing belt or do I have to retrofit?
The existing belt can be used The eWickler eW810-F fits with every standardized 23 mm belt.
Can I retrofit all shutters with the eWickler?
All popular shutters can be fitted with our eWickler, it doesn’t matter if it’s synthetic, aluminum or wood shutters. Raising and lowering works with the push of a button.
Can the belt winder also get connected directly to the power supply?
A plug connection for the socket is designated. The belt winder can also be connected to the local power grid. You can choose freely between surface-mounting or flush-mounting the cable.
Does a belt of 15mm width fit as well?
For a belt width of 15 mm you need the eWickler with the suffix -M in its item code. These are specifacally designed for this smaller belt width.
Can I also buy the eWickler in a specialty store?
The easiest way is to order your eWickler in our online shop. Your eWickler will be delivered directly from the factory and will arrive at your home in a few days.
COMPARISON OF THE VARIOUS eWICKLER MODELS
Standard | Comfort | |||||
---|---|---|---|---|---|---|
Surface Mounted Device | eW910 | eW910-F | eW930-F | eW920 | eW920-F | eW940-F |
Flush Mounted Device | eW810 | eW810-F | eW830-F | eW820 eW825 Maxi | eW820-F | eW840-F eW845-F Maxi |
![]() | ||||||
![]() | ||||||
![]() | ||||||
autom. Summer/Winter time adjustment |