Comfort eW820, eW820-M

Electronic Belt Winder

  • for all typical type of shutters with 23 mm / 15 mm belt width
  • large LC-display with adjustable lightning
  • 20 hours power reserve in case of power failure
  • individually programmable

126,72 146,21 

Delivery time: 2-4 working days

126,72 
16% VAT included, plus shipping and handling

Delivery time: 2-4 working days

Clear

eWICKLERs ADVANTAGES

  • soft start and soft stop
  • autom. summer/winter time adjustment
  • individual sun/twilight control possible
  • internal network-synchronized watch

THE eWICKLER Comfort eW820, eW820-M

The eW820 for the flush mounted type has individually adjustable times for lifting and lowering the shutters as much as internal network-synchronized watch. The time and function can be easily read and operated via the large LC display. Particularly clever: the brightness of the display can be adjusted individually.

Soft start and soft stop ensure that the shutters run quietly even in the intermediate position. With our accessories, such as the sun sensor, you can make your electric belt winder even smarter. The assembly is easy to perform and can be done without demolition of walls and expensive painting and wallpapering. Our eWickler is therefore ideal for quick and easy retrofitting.

EASY INSTALLATION IN 3 EASY STEPS

1. REMOVE OLD BELT WINDER

Lower your roller shutters completely so that you can remove the old belt winder and unwind the webbing.

2. INSERT BELT STRAP IN eWICKLER

The webbing can be easily inserted and fastened by being inserted from the front into the eWICKLER and then hooked.

3. CONNECTING THE eWICKLER

The installation is also uncomplicated: simply fix the eWickler with mounting screws, pay attention for straight installation and distance to the masonry. You are done!

SCOPE OF DELIVERY

  • eWickler eW820 or eW820-M
  • connection cable 1.50 m
  • installation and operation instructions
  • metal fittings

Accessory like the sun/twighlight sensor and further products you may find here.

TECHNICAL DATA

Item eW8201001-000004
Item eW820-M1001-000006
applicationflush mounted
supply voltage230 V ~ 50 Hz
nominal capacity (max.)120 W
stand-by consumption≤ 0,2 W
nominal torque11 Nm
nominal speed32 U/min, regulated
maximum traction50 kg
width of belt23 mm (eW820) / 15 mm (eW820)
winding capacity6.3 m (1 mm strength of belt)
permitted shutter surfaceca. 7 qm at 5 kg/qm,
ca. 4 qm at 10 kg/qm
short-time operation4 min
overrun traverse≤ 0,2 U
level of protectionII
class of protectionIP20
power reserve (in case of power failure)ca. 20 h
dimension housing132 x 139 x 34,5 mm (HxDxW)
mounting hole interval165/185 mm
range of temperature+4 °C up to +40 °C

Dimensions

FAQ

The existing belt can be used The eWickler eW820 fits with every standardized 23 mm belt.

All popular shutters can be fitted with our eWickler, it doesn’t matter if it’s synthetic, aluminum or wood shutters. Raising and lowering works with the push of a button.

A plug connection for the socket is designated. The belt winder can also be connected to the local power grid. You can choose freely between surface-mounting or flush-mounting the cable.

For a belt width of 15 mm you need the eWickler with the suffix -M in its item code. These are specifacally designed for this smaller belt width.

The easiest way is to order your eWickler in our online shop. Your eWickler will be delivered directly from the factory and will arrive at your home in a few days.

COMPARISON OF THE VARIOUS eWICKLER MODELS

All devices available for 23 mm webbings or 15 mm mini-webbings.
StandardComfort
Surface Mounted DeviceeW910eW910-FeW930-FeW920eW920-FeW940-F
Flush Mounted DeviceeW810eW810-FeW830-FeW820
eW825 Maxi
eW820-FeW840-F
eW845-F Maxi
Smoke Detector Evaluation
Radio Control
LC Display
autom. Summer/Winter time adjustment

eWICKLER ACCESSORIES